These 1/4”-20 screws come in 2 different lengths: 3/8” and 1/2”. The 3/8” length screws are used to secure a Predator Mount Base Plate to the horizontal beam of the mount. The 1/2” length screws are used to secure the Top Plate to the Predator Desk/Table Mount by inserting them into the threaded holes at one end of the vertical beam. They are also used to secure the toggle clamp to the rear of the vertical beam included with the Predator Desk/Table Mount, by using the center holes located in the base of the toggle clamp, and a 10 Series T-Slot T-Nut for each screw. Both lengths require a 5/32” Allen Wrench to loosen or tighten.
Note: These are intended as replacement or spare parts. All required Hardware for assembly of a Predator Mounting System is included with the purchase of the Predator Mounting System.