The Phoenix S.W.A.R.M.


Color: Hunter Series (Silver Beams)
Price:
Sale price$27.50

Description

**The Phoenix S.W.A.R.M. is ONLY the mounting rail and hardware. The Phoenix Attachment System is purchased SEPARATELY! - If you have any questions, please ask on our Discord Server BEFORE you purchase.**

The Phoenix S.W.A.R.M. (Swinging Wing Arm Rail Mount) is a mounting kit that attaches to the side of vertical beam of an existing Predator Desk/Table Mount. It consists of a set of two (2) pieces of  1"x1" aluminum extrusion rail. These sets are 5" [127mm] or 6" [153mm] in length and are connected by a central hinge. The Phoenix S.W.A.R.M. comes with all necessary hardware for attachment. It will attach to the vertical beam of any Predator Desk/Table Mounting System, you will have the ability to move your Phoenix Attachment System with any support device attached to it, in ways like never before! Rotate the your device 360 degrees, and tilt any attached device up to 60 degrees. Obtaining the perfect position and distance for an attachment device, has never been easier. Realistically, the only limitation you have, is your own creativity!

The S.W.A.R.M. comes with two (2) sections of 1" x 1" aluminum extrusion, one (1) central hinge, and all the hardware required to attach the S.W.A.R.M. to your vertical beam. There are two options for brackets. You can select either the "SIDE" attachment version, which comes with one (1) 2x2 "L" Bracket, and allows for attachment to the side of the vertical beam. Or you can select the "TOP" attachment version, which comes with two (2) of the 1x2 "L" Brackets and allows to attach the S.W.A.R.M. over the topside of the Mount Top Plate. And finally, you have the option to select "BOTH" and receive the brackets to mount the S.W.A.R.M. in either it's "TOP" or "SIDE" configuration. 

If you intend to use this mounting kit with your Phoenix Attachment System, at a height HIGHER than the surface of your desk, be sure to select the "TOP" mounting kit, which consist of two (2) "L" Shaped brackets, that are placed on either side of your vertical beam, and allow the S.W.A.R.M. to sit above the Mount Top Plate. The Phoenix S.W.A.R.M. will allow one of the rails to "swing" in either direction. The Phoenix itself can be mounted in EITHER section of rail, and however close or far away from the vertical beam you would like. With the Phoenix, there is no limit to the versatility you will have when adding a device to your mounting system. 

*** This product ONLY includes the Phoenix S.W.A.R.M. mounting kit. All other devices, included the Phoenix Attachment System, are sold SEPARATELY! If you have any questions, PLEASE ask on our Discord BEFORE you purchase. Thank you!!

You may also like

Recently viewed